Level of Water in a Dam. Engineering Statistics Project (Statistics Project Sample)
test on the use of r-program
source..Level of Water in a Dam
Introduction
This report presents a model of changing level of water in a dam. Minimum level of water in the dam is taken as h=0 and maximum level is given by hmax. Level of water in the dam is determined by rainfall in the catchment area, evaporation and water uses. It increases when rain falls and decreases. The model ignores losses due to leakage and seepage. The ideal profile of the dam is given by Figure 1 below.
Figure SEQ Figure \* ARABIC 1: Ideal profile of dam and water level
Cross-sectional Area and Level of Water
Relationship between water volume and level is analyzed in this report. Surface area of water in the dam A is determined as function of water level (height) given by h. From this relationship, it is therefore noted that the area varies from 0 to Amax when h increases from 0 to hmax.
Other Topics:
- Monte Carlo Technique. Engineering Statistics Project.Description: This was an interesting technique called monte Carlo technique, which I did on Matlab. it can be applied in statistics, where it isolates all the possibilities, especially in games....9 pages/≈2475 words| No Sources | Other | Engineering | Statistics Project |
