Essay Available:
All Pre Written Papers From The Engineering Category
- Report Manufacture ProcessDescription: Report Manufacture Process Engineering Essay...3 pages/≈825 words| 1 Source | APA | Engineering | Essay |
- Water Drainage Techniques, Materials, Processes, and Maintenance Description: Water Drainage Techniques, Materials, Processes, and Maintenance Engineering Research Paper...3 pages/≈825 words| 3 Sources | APA | Engineering | Research Paper |
- TEMPERATURE CONTROL SYSTEMDescription: TEMPERATURE CONTROL SYSTEM Engineering Term Paper...32 pages/≈8800 words| 11 Sources | APA | Engineering | Term Paper |
- Finite Element Analysis of Seepage and Stresses in a Concrete Gravity DamDescription: Finite Element Analysis of Seepage and Stresses in a Concrete Gravity Dam Engineering Essay...6 pages/≈1650 words| 10 Sources | APA | Engineering | Essay |
- Examination of a truss structure using the truss2D MATLABDescription: Examination of a truss structure using the truss2D MATLAB Engineering Case Study...7 pages/≈1925 words| 3 Sources | APA | Engineering | Case Study |
- Investigating the Suitability of use of low GWP Working Fluid in small-sized Air Source Heat. . .Description: Investigating the Suitability of use of low GWP Working Fluid in small-sized Air Source Heat Pumps using MATLAB/SIMULINK Engineering Thesis Writing...41 pages/≈11275 words| 30 Sources | APA | Engineering | Thesis |
- Ethics of Plant-Based MeatDescription: Ethics of Plant-Based Meat Engineering Term Paper...3 pages/≈825 words| 5 Sources | APA | Engineering | Term Paper |
- ETHICS/SOCIAL ISSUE
Description: ETHICS/SOCIAL ISSUE Engineering Research Paper...3 pages/≈825 words| 13 Sources | APA | Engineering | Research Paper |
- Explanatory WritingDescription: Explanatory Writing Engineering Essay...5 pages/≈1375 words| 5 Sources | APA | Engineering | Essay |
- Physics TestDescription: Physics Test Engineering Other (Not Listed)...11 pages/≈3025 words| 6 Sources | APA | Engineering | Other (Not Listed) |
- Developments and Further Research on Carbon Fiber Reinforced Polymer (CFRP) Composites.Description: Developments and Further Research on Carbon Fiber Reinforced Polymer (CFRP) Composites. Engineering Essay...5 pages/≈1375 words| 13 Sources | MLA | Engineering | Essay |
- Faraday LabDescription: Faraday Lab Engineering Lab Report...2 pages/≈550 words| 3 Sources | APA | Engineering | Lab Report |
- Week 2 ISSC660Description: Week 2 ISSC660 Engineering Essay...2 pages/≈550 words| 3 Sources | APA | Engineering | Essay |
- GIS Watershed Polygon: Correlation Data Analysis Description: GIS Watershed Polygon: Correlation Data Analysis Engineering Lab Report...2 pages/≈550 words| 5 Sources | APA | Engineering | Lab Report |
- GIS Watershed Polygon: Covariance Data Analysis Description: GIS Watershed Polygon: Covariance Data Analysis Engineering Lab Report...2 pages/≈550 words| 8 Sources | APA | Engineering | Lab Report |
- Literature Review: Down Syndrome CenterDescription: Literature Review: Down Syndrome Center Engineering Coursework...2 pages/≈550 words| 6 Sources | APA | Engineering | Coursework |
- The Value of AI and Predictive Analytics ERM Across IndustriesDescription: The Value of AI and Predictive Analytics ERM Across Industries Engineering Essay...2 pages/≈550 words| 2 Sources | APA | Engineering | Essay |
- Safety Collaboration and Coordination for Subcontractors in Construction ProjectsDescription: Safety Collaboration and Coordination for Subcontractors in Construction Projects Engineering Research Proposal...11 pages/≈3025 words| 18 Sources | APA | Engineering | Research Proposal |
- Engineering Innovations for Energy ConservationDescription: Engineering Innovations for Energy Conservation Engineering Essay...1 page/≈275 words| 1 Source | APA | Engineering | Essay |
- Rotational Motion Pre-LabDescription: Rotational Motion Pre-Lab Engineering Lab Report...1 page/≈275 words| No Sources | Other | Engineering | Lab Report |
- Use ERDplus.com to create the Entity Relationship Diagram and Schema Diagram.Description: Use ERDplus.com to create the Entity Relationship Diagram and Schema Diagram. Engineering Coursework...3 pages/≈825 words| No Sources | APA | Engineering | Coursework |
- Shape Factor for Fracture ModesDescription: Shape Factor for Fracture Modes Engineering Coursework...2 pages/≈550 words| 7 Sources | MLA | Engineering | Coursework |
- Birth Center Planning - Floor Plan, Part 2Description: Birth Center Planning - Floor Plan, Part 2 Engineering Coursework...3 pages/≈825 words| 5 Sources | APA | Engineering | Coursework |
- Deforestation Description: Deforestation Engineering Essay...5 pages/≈1375 words| 14 Sources | Harvard | Engineering | Essay |
- UrbanizationDescription: Urbanization Engineering Essay...7 pages/≈1925 words| 5 Sources | Harvard | Engineering | Essay |
- Design and Implementation of a Composite Signal Generator Using READ2302G Operational Amplif. . .Description: Design and Implementation of a Composite Signal Generator Using READ2302G Operational Amplifiers and HD74LS74 Chip Engineering Lab Report...7 pages/≈1925 words| 10 Sources | Harvard | Engineering | Lab Report |
- REPORT ON WAVE ENGINE MODELLING AND SIMULATIONDescription: REPORT ON WAVE ENGINE MODELLING AND SIMULATION Engineering Lab Report...7 pages/≈1925 words| 9 Sources | Harvard | Engineering | Lab Report |
- Solar TechnologyDescription: Solar Technology Engineering Essay...2 pages/≈550 words| 3 Sources | APA | Engineering | Essay |
- Construction of a High-Speed Railway SystemDescription: Construction of a High-Speed Railway System Engineering Research Paper...10 pages/≈2750 words| 15 Sources | Harvard | Engineering | Research Paper |
- ACCIDENT CAUSATION IN THE CONSTRUCTION INDUSTRY.Description: ACCIDENT CAUSATION IN THE CONSTRUCTION INDUSTRY. Engineering Dissertation Writing...50 pages/≈13750 words| 50 Sources | APA | Engineering | Dissertation |
- A Solar Heat Water System DesignDescription: A Solar Heat Water System Design Engineering Dissertation Writing...50 pages/≈13750 words| 75 Sources | APA | Engineering | Dissertation |
- Construction Description: Construction Engineering Research Proposal...20 pages/≈5500 words| 20 Sources | APA | Engineering | Research Proposal |
- Angular Displacement ComputationDescription: The pendulum oscillation is described by the initial-value problem consisting of the equation of motion with initial conditions: θ'' + g/Lsin(θ) = 0, θ(t_0) = θ_0, θ'(t_0) = ω_0 Here, L is the length of the pendulum, g acceleration due to gravity, θ the angle the pendulum makes with the vertical, θ_0...5 pages/≈1375 words| No Sources | Other | Engineering | Math Problem |
- Examination of the Applications of Pneumatic and Hydraulic SystemsDescription: Scenario You have recently joined a dynamic innovative engineering company as a trainee Automation Engineer, you are required to work in the assembly of special purpose machinery and programming robots in accordance with complex engineering drawings, producing engineering drawings, mechanical, pneumatic & ...8 pages/≈2200 words| 12 Sources | APA | Engineering | Research Paper |
- Specifying Types of Inhibition by Plotting Michaelis-Menten PlotDescription: Interest toward using Eversa® Transform 2.0 enzyme is increasing nowadays for esters production. It catalyze the conversion of waste cooking oils to biodiesel. Given MichaelisMenten plot determine, solve for the following: 1 Specify the type of inhibition for each inhibitor To specify the type of inhibition...1 page/≈275 words| No Sources | APA | Engineering | Math Problem |
- Benefits and drawbacks of cloud computingDescription: Benefits of cloud computing, offering numerous benefits such as increased flexibility, scalability, cost savings, and security. Whether you're a small business owner or part of a large enterprise, cloud computing can help streamline your operations and improve your bottom line....1 page/≈275 words| 7 Sources | APA | Engineering | Research Paper |
- MODERN ARCHITECTURE Description: Modern architecture homes are a style of residential design that emerged in the early 20th century and is characterized by its clean lines, simple forms, and emphasis on function over ornamentation. ...6 pages/≈1650 words| 24 Sources | Chicago | Engineering | Research Paper |
- Engineering and Construction Description: Engineering and Construction Engineering Case Study...2 pages/≈550 words| 6 Sources | APA | Engineering | Case Study |
- Human Factors in AviationDescription: Human Factors in Aviation Engineering Coursework...2 pages/≈550 words| 2 Sources | APA | Engineering | Coursework |
- Current Barriers in the year 2022 to Autonomous Vehicles as a viable method of transport for. . .Description: Current Barriers in the year 2022 to Autonomous Vehicles as a viable method of transport for a/I Engineering Research Paper...5 pages/≈1375 words| 4 Sources | Other | Engineering | Research Paper |
- Order 3728490_Application of Artificial Neural Network (ANN) in Civil Engineering.editedDescription: Order 3728490_Application of Artificial Neural Network (ANN) in Civil Engineering.edited Engineering Essay...3 pages/≈825 words| 3 Sources | MLA | Engineering | Essay |
- C++ Code Description: C++ Code Engineering Other (Not Listed)...3 pages/≈825 words| No Sources | Other | Engineering | Other (Not Listed) |
- Chalk's Ocean Airways Flight 101Description: Metal fatigue failure in the wing of a plane occurs when there is a repeated flight cycle and frequent use that makes the element metals in a plane weaker over time. The metals require attention and repair, and when they are not given attention or maintenance, they are likely to cause a plane failure....1 page/≈275 words| No Sources | APA | Engineering | Essay |
- The Airlines' Impact on Climate and How to Curb the EffectsDescription: The impact of aviation on climate change is undeniable. The emissions, mostly from aviation-related activities, are contributing to global warming and therefore facilitating climate change. This paper discusses how the aviation industry is contributing to climate change and the steps that the stakeholders...5 pages/≈1375 words| 1 Source | APA | Engineering | Essay |
- Differential CalculusDescription: Part a fx=4x4-3x2+2x-1 Using the derivative formula, f'x=lim∆x→0fx+∆x-f(x)∆x ddx(4x4-3x2+2x-1 Apllying the sum or diffrence rule:f±g'= f'±g' ddx4x4=16x3 ddx3x2=6x ddx2x=2 ddx1=0 Therefore, =16x3-6x+2-0 =16x3-6x+2 The equation of the tangent to fxat x=3 will be y=16x3-6x+2 = 1633-63+2 =416 ...16 pages/≈4400 words| No Sources | APA | Engineering | Math Problem |
- Design and Fabrication of Dry Cell Hydrogen GeneratorDescription: Depletion of fossil fuel reserves occurs as a result of the continued consumption of fossil fuels. Depletion of fossil fuels, which account for up to 80% of human needs, is a direct effect of the human dependence on fossil fuels (Zou, 2016). Due to its environmental benefits, hydrogen was chosen as a...45 pages/≈12375 words| 17 Sources | Harvard | Engineering | Thesis |
- Disaster Investigations for System Engineers Description: A system engineer applies extensive engineering disciplines in all aspects of product design and development to ensure effectiveness and safety in the final product. However, the engineers' maximum process effort never guarantees absolute safety and efficiency. The final products are susceptible to...2 pages/≈550 words| 3 Sources | APA | Engineering | Essay |
- Solution to UK’s Housing CrisisDescription: Over the last decade, there have been an increase in need for better housing. Emergencies and natural disasters that affect on-site construction have also been on the rise. Construction can sometimes be costly and time-consuming. With an aim to have affordable and decent housing as envisioned...6 pages/≈1650 words| 10 Sources | Harvard | Engineering | Dissertation |
- Comparison of Two Air Traffic Control Entities Description: To effectively maintain aircraft moving safely, airports in the United States are divided into various categories of airspace that offer different services. Ground controllers and a controller oversee the initial departures and arrivals at airports with class D, C, or B airspace. Class D is thought to have...2 pages/≈550 words| 2 Sources | APA | Engineering | Essay |
- System Requirement Of An Engineering ProjectDescription: Businesses and households observe their valuables being accessed far too often by intruders. Since they depend on a traditional security camera to capture the occurrence, they can only respond after the fact. This might result in the firm or household losing all or a portion of their net worth. With just ...9 pages/≈2475 words| 5 Sources | APA | Engineering | Coursework |
- Frameworks for the Design of Shipborne Equipment Using a GearboxDescription: The design of Shipborne Equipment requires different conceptual frameworks and design methodologies. One of the most influential frameworks for the design of Shipborne Equipment is using the gearbox. The gearbox is proven to work effectively under high and new technology conditions. A gearbox will be used...8 pages/≈2200 words| 4 Sources | APA | Engineering | Research Paper |
- Static and Dynamic Analysis of Radial Engine Master Rod Description: Radial Engine is a reciprocating type IC Engine Configuration in which the pistons are connected to the crankshaft using master and articulating rod assembly. The small end of the master rod is connected to the piston end, and the big end is mounted on the crank pin of the crankshaft....10 pages/≈2750 words| 8 Sources | Other | Engineering | PowerPoint Presentation |
- Failure Analysis of Master Rod in Radial EngineDescription: The Radial Engine is an IC style reciprocating engine in which, like the spokes of a wheel, the cylinders radiate outward from a central crankcase. It depicts a stylized star when viewed from the front and is ofter called the star engine. The pistons are connected to the master rod and articulating rods...34 pages/≈9350 words| 8 Sources | APA | Engineering | Coursework |
- Analysis of UK Clean Energy PoliciesDescription: Unilever is a global consumer goods firm with a history dating back over a century. It is a global brand with representation in over 190 countries and over 400 household name items. Unilever is a pioneer in sustainable business, and its operations have been recognized for adhering to environmental...10 pages/≈2750 words| 19 Sources | APA | Engineering | Term Paper |
- Energy Recovery DeviceDescription: In seawater reverse osmosis systems (SWRO), energy recovery devices lower energy usage and may make it easier to implement desalination systems on a broad scale. This study analyses and optimizes a Rotary Vane Energy Recovery Device (RVERD) with the goal of reducing cavitation and enhance...1 page/≈275 words| 11 Sources | Harvard | Engineering | Thesis |
- Wind Tunnel Testing Using a Modern VehicleDescription: The experiment entailed putting a vehicle model in a wind tunnel, applying a force to it, and changing the wind tunnel's velocity. The relationship between the non-dimensional drag on the model and velocity was derived using dimensional analysis, and the relationship was able to be stated as an equation...1 page/≈550 words| 3 Sources | APA | Engineering | Lab Report |
- Corrosion and OxidationDescription: Corrosive environments include the atmosphere, aqueous solution, soils, acids bases inorganic solvents, molten salts, liquid metals, and last but not least, human body. On a tonnage basis, atmospheric corrosion account for the greatest loss. Moisture containing dissolved oxygen is the primary corrosive ...1 page/≈550 words| 1 Source | APA | Engineering | Coursework |
- Designing an Automated Vegetable CutterDescription: In the late 90’s, automation was the rage of the engineering world. The best of the minds, rallied day and night to bring forth improvements of significant magnitude, something which could make an impact in the day-to-day life. Today, it’s a plethora of fields which have embraced with automation, from...1 page/≈550 words| 27 Sources | APA | Engineering | Coursework |
- The Use of AI with Autonomous VehiclesDescription: The advancement of technology has resulted in complex systems and concepts used in different sectors to improve efficiency and effectiveness. Artificial intelligence is one of the modern technological advancements that have significantly impacted the activities within various industries and, more specifically...2 pages/≈550 words| 6 Sources | APA | Engineering | Essay |
- Annotated Bibliography on Unmanned AircraftDescription: In this journal article, Michael Ashkenazi theorizes the next step in the development of unmanned aircraft. Focusing on the role of unmanned aircraft in combat, the author highlights the ethical and legal issues that relate to unmanned aircraft vehicles and the imperatives that are motivating the new ...2 pages/≈550 words| 4 Sources | APA | Engineering | Annotated Bibliography |
- The Destructive Effect of Air Pollution on Human Health and The EnvironmentDescription: Subjection to high magnitudes of air pollution can lead to various adverse health consequences. We are living in a world where air pollution is a significant concern. Air pollution affects the climate and impacts the community and individual well-being due to increased mortality and morbidity. Many pollutants...7 pages/≈1925 words| 5 Sources | APA | Engineering | Research Paper |
- The New King George Senior Secondary School ProjectDescription: The New King George Senior Secondary School Project Engineering Research Proposal...40 pages/≈11000 words| No Sources | Other | Engineering | Research Proposal |
- The Achievements of Renaissance ArchitectureDescription: Renaissance architecture refers to the early 15th century to the early 17th century European era when architects consciously developed and revived Ancient Roman and Greek architectural features, such as ordered straight columns, lintels, and pilasters. During this golden age, artists turned into artists by...2 pages/≈550 words| 4 Sources | Chicago | Engineering | Term Paper |
- Power-Save Robotic Hand with an Intelligent Grip-Lock MechanismDescription: Robots are built to perform repetitive tasks in various automated areas. Robotic arms are the most common robots, especially found in manufacturing industries. They aid in grasping, welding, painting, and other tasks that need high precision and speed. Such kinds of tasks are simply overwhelming to human beings...2 pages/≈550 words| 2 Sources | APA | Engineering | Research Proposal |
- Project to Remodel and Modernize Cascade Rail TunnelDescription: This project intends to remodel and modernize the Cascade railway channel. The Cascade railway tunnel passes underneath Cascade mountain ranges in Washington. This infrastructure has remained neglected, obscured and appears ancient in the modern age. The project will be completed within 12 months, starting ...4 pages/≈1100 words| 3 Sources | MLA | Engineering | Coursework |
- Foundation Reuse Environmental Benefit with a Holistic ApproachDescription: The building and construction industry is faced with growing demands due to the growing population and economic empowerment among the people. At the same time, the industry faces challenges associated with the impact the sector has on the environment. The detrimental factors include large volumes of solid...33 pages/≈9075 words| 7 Sources | Harvard | Engineering | Dissertation |
- Integrating Solar Energy into the EV Charging StationDescription: he aim of the research is to identify literature that is linked to the use of photovoltaic (PV) cells linked to the energy grid for the electric vehicle (EV) charging station. From the research, the major themes that are associated with the hybrid charging infrastructure are cost benefits of the system...23 pages/≈6325 words| 19 Sources | Other | Engineering | Term Paper |
- Air Conditioning Course In Mechanical EngineeringDescription: Axial Fans: Air is moved along the fan's axis by axial fans, which include propellers, tubes, and vane models. In the same way that aircraft propellers produce lift and pressurize the air, these fans do the same. The airflow is driven by a motor and a propeller in a propeller fan. It is similar to a...6 pages/≈1650 words| 3 Sources | APA | Engineering | Coursework |
- How to Measure and Increase Employee EngagementDescription: Employee engagement is a measurement of how motivated and committed employees are to their work (Macey and Schneider, 2008). One way to evaluate this is to survey, interview, or conduct focus groups with employees. Other indicators include absenteeism, turnover, and productivity levels. Surveys Surveys ...3 pages/≈825 words| 5 Sources | Harvard | Engineering | Essay |
- 1986 Challenger Space Vehicle AccidentDescription: On the morning of January 28, 1986, the spaceplane “Challenger” exploded 73 seconds after liftoff, causing the deaths of all crewmembers and the total loss of the vehicle. No persons on the ground were injured, as the launch trajectory took the vehicle over the sea at the time of the explosion and the ...7 pages/≈1925 words| 5 Sources | APA | Engineering | Research Paper |
- Problem-solving and The Application of Ohm's Law to Engineering ProblemsDescription: In the first and second part of this paper, the author will test the validity of Ohm’s law experimentally, via two resistance experiments. In the third part, some problems regarding Ohm’s law are solved mathematically. Aim: The objective of this work is to explore the relationships between current, voltage...5 pages/≈1375 words| No Sources | Other | Engineering | Lab Report |
- Successful Affordable Housing Projects in New York Description: Over the last century, the City of New York has been looking for viable, affordable housing models. For-profit or non-profit developers do not build affordable housing projects. Most affordable housing projects offer supportive services on-site that help the disabled and the homeless live dignified lives ...3 pages/≈825 words| 3 Sources | APA | Engineering | Research Paper |
- Construction Proposal of a Café Within the Hyde ParkDescription: The green buildings technology is a form of construction technology that includes measures to ensure low operational energy demand and consumption. The technology also encourages the reuse and recycle of materials (Shoubi et al., 2015). To embrace this technology, architects and engineers design and construct...9 pages/≈2475 words| 4 Sources | Harvard | Engineering | Research Proposal |
- The Achievements of Renaissance ArchitectureDescription: Filippo Brunelleschi’s roofing of the Florence Cathedral with arches arranged to form a herringbone began the European Renaissance architecture era that lasted from the early 15th century to the early 17th century. Architects redefined and reinvented architectural design styles and philosophies by studying...2 pages/≈550 words| 3 Sources | Harvard | Engineering | Essay |
- Discussion: Carbonate Acidizing in Petroleum IndustryDescription: As a reservoir for stimulation, the acidizing procedure is frequently deployed to upsurge adjoining-wellbore flow volume of petroleum during production and in insertion shafts (Dong et al. ,2017). Carbonate reservoirs mostly contain dolomite or carbonates. The method encompasses the introduction of acid, ...5 pages/≈1375 words| 7 Sources | APA | Engineering | Term Paper |
- Research Proposal: Earthquake Resistant Building ConstructionDescription: The threat of natural disasters is continuous and mostly unpredictable; however, the understanding of the forces of nature is somewhat limited in the public domain. As such, imperatively, emphasizing that we respect the environment with a constant reminder on including preventive measures as regards natural...14 pages/≈3850 words| 15 Sources | MLA | Engineering | Research Proposal |
- Project Prairie Grass Experiment Conducted in O'Neill in NebraskaDescription: Project Prairie Grass was a 1956 experiment conducted in O’Neill in Nebraska to study the dispersion of a gas from a point source compared to the diffusion of gases in the atmosphere. As such, it explores the essential characteristics of perpendicular dispersal in the atmospheric surface layer. It traces ...20 pages/≈5500 words| 11 Sources | APA | Engineering | Dissertation |
- Determining The Reading of The Voltmeter Shown in the FigureDescription: Determine the reading of the voltmeter shown in the figure. Consider the values of the resistors as: R1 = 5Ω, R2 = 4.4Ω, R3 = 7.7Ω, R4 = 4.5Ω, R5 = 4.8Ω and that the source provides a voltage V = 8.2V . Various parts are identified as either series or parallel, reduced to their equivalents, and further reduced...2 pages/≈550 words| No Sources | Other | Engineering | Research Paper |
- Pillars of Engineering from a Nuclear Engineer's PerspectiveDescription: Engineering is a discipline and profession that employs science and mathematics to design or make things, as such leadership skills are critical in ensuring its success. In soliciting a viable leadership plan, several pillars are relied upon to provide a clear roadmap towards attaining the desired...2 pages/≈550 words| No Sources | APA | Engineering | Term Paper |
- Housing and Rental Costs Planning: Demographic Trends and Built-form FeaturesDescription: Location: Parkwood district of the City of Canning is a suburb in Southeastern Perth, Western Australia. It is within the City of Canning Local Government Area (LGA), situated south of Ferndale and Southwest Lynwood. Parkwood is 10 kilometers away from the CBD, Perth. Size: Parkwood suburb rests on an approximately...12 pages/≈3300 words| 18 Sources | Chicago | Engineering | Term Paper |
- Generative Design is The Inevitable Future of 3D Printing TechnologyDescription: The modern production of objects that are in everyday use follows the principle of natural development, which is an idea for the process of generative design. This would mean that everything we use, starting with household items, public goods, tools at work, is evolving again as engineering solutions. With all...6 pages/≈1650 words| 5 Sources | Other | Engineering | Article |
- Synthesis: CdS Nanoparticles by Using Sol-Gel for Wastewater TreatmentDescription: This project aims at performing a synthesis of CdS nanoparticles by using sol-gel for wastewater. Semiconductor nanoparticles with controllable silica matrix size and stability using a room temperature sol-gel process was used to prepare CdS. Using the respective metal precursors and Tetraethylorthosilicate...7 pages/≈1925 words| 10 Sources | Harvard | Engineering | Research Paper |
- Power-Save Robotic Hand with an Intelligent Grip-Lock MechanismDescription: Robots are built to perform repetitive tasks in various automated areas. Robotic arms are the most common robots, especially found in manufacturing industries. They aid in grasping, welding, painting, and other tasks that need high precision and speed. Such kinds of tasks are simply overwhelming to human beings...2 pages/≈550 words| 2 Sources | APA | Engineering | Research Proposal |
- Crime Analysis in Schaumburg, IllinoisDescription: The data obtained analyses the crimes committed, mainly robbery in the Schaumburg town of Chicago for three years, 2017, 2018, and 2019. To get the required data, various geographical data analysis techniques were used, such as cartography, visualization, Geographic Information systems, and spatial statistics...3 pages/≈825 words| 3 Sources | APA | Engineering | Coursework |
- Urban Design Pico Rivera, CaliforniaDescription: Pod and collector plan as well as neo-traditional principles of design aim at developing urban centers that preserve natural ecologies, agrarian landscapes, and cultural heritage sites. The two models focus on designing human-scale neighborhoods and walkable streets that people enjoy walking. Walkable ...2 pages/≈550 words| 5 Sources | APA | Engineering | Coursework |
- Evaluating the Performance of Stormwater Drainage SystemsDescription: Flooding is one of the most catastrophic natural calamities globally, claiming lives and posing hazards to the ecology, infrastructure and service delivery. The hydrological balance is affected by the rapid emergence of settlements and irregular urbanization caused by population growth and industries in ...28 pages/≈7700 words| 19 Sources | APA | Engineering | Research Paper |
- How a Loft can be Transformed into An Home-Based OfficeDescription: Purpose: The main objective of this set of instructions is to help users understand the process of transforming loft space into a home office which conducive for carrying out office operations while at home. General Description: Rather than selecting a front flex room or rather a room within the basement...1 page/≈275 words| 3 Sources | APA | Engineering | Coursework |
- The Implementation of the Quality ToolDescription: Air Force bases are mainly involved in supporting military operations. The aircraft maintenance quality assurance unit is an important facet of any airbase. It is involved in launching, recovering, and servicing aircraft between flights under the management of a quality assurance manager (Moore, Johnson, Rehg...1 page/≈275 words| No Sources | MLA | Engineering | Case Study |
- Numerical study on the stability of thin-wall laminate compositesDescription: Numerical study on the stability of thin-wall laminate composites Engineering Research Proposal...2 pages/≈550 words| 6 Sources | Harvard | Engineering | Research Proposal |
- Finding the Metacentric HeightDescription: A rectangular body 5 m long, 3m wide, 1.2 m height is immersed to a depth of 0.8 m in water. Find the metacentric height. Solution Given; Dimension of the block = 5m x 3m x1.2m Depth of immersion = 0.8 m Distance AB = ½ X Depth of immersion = ½ x 0.8 m = 0.4 m Density of sea water = 1000 kg/m3 Meter-...1 page/≈275 words| No Sources | APA | Engineering | Math Problem |
- Bearing Capacity of Shallow FoundationsDescription: Foundation forms the lowest part of a structure, and performs the function of transferring an aggregate load of a given structure to the type of soil on which it stands and resists. A well-designed foundation exchanges the given load all through the ground without causing much stress on the soil. Imposing...20 pages/≈5500 words| 24 Sources | Harvard | Engineering | Research Paper |
- Lab Report for Frequency Response of NetworksDescription: The main idea of this lab is to get a brief view about the Frequency Response of different kind of RC, RL and RLC circuits. This study gives understanding of how to implement different type of electronic filters for some real time applications. By combination of R, C & L, our system can represent different ...14 pages/≈3850 words| 3 Sources | APA | Engineering | Lab Report |
- Electrical Engineering Mathematics AssignmentDescription: * A current waveform may be described by is=13cos2πft-π4 [A] Where frequency f=1Hz, and t represents time. Make time t the subject of the formula and hence determine the first point in time when the current waveform has the magnitude of +10A. Solution: As the frequency of the above expression is 1Hz, ...7 pages/≈1925 words| No Sources | APA | Engineering | Math Problem |
- Power Supply and Rectifier CircuitsDescription: This lab introduces different type of Electronic Circuits get us practical understanding about these circuits. The circuits being discussed here and experimented for their performance are simple Power Supply circuits and different types of Half Wave and Full Wave Rectifiers. The Rectifiers are being used ...7 pages/≈1925 words| 3 Sources | APA | Engineering | Lab Report |
- Impact of Block Chain Technology to Smart Industry Systems: AutomotiveDescription: It is stipulated that 80% of online transactions are likely to change in the next 20 years (Crosby et.al, 2016). For instance, block chain can be applied in industry 4.0 which looks at how the factories can change through adoption of latest technologies (Dorri et.al, 2017). The concept behind industry 4.0 ...4 pages/≈1100 words| 5 Sources | APA | Engineering | Essay |
- Operating Principle on Mechatronic EngineeringDescription: Mechatronic engineering is a topic on its own where one would be familiarized with emerging technology in engineering. There is a reason that one would need to have an interest in accessing such knowledge. The topic has a wide range of combining the comprehensive access skills entailed in mechanical ...3 pages/≈825 words| 2 Sources | MLA | Engineering | Essay |
- Matrices, Differentiation and IntegrationDescription: 1. Evaluate the following: By employing ILATE Rule: uv dx=uv dx- dudxv dxdx Let y = x sin3x dx Therefore, xxsin 3xdx -ddx(x) . (sin3x dx) dx = x(-cos3x)3 - 1. -cos3x3 dx = -xcos3x3 + 13 cos3x dx = -xcos3x3 +sin3x9 + C 2. If, then for what value of α is A an identity matrix? Comparing the given ...2 pages/≈550 words| 2 Sources | APA | Engineering | Math Problem |
- 262 High Holborn PropertyDescription: Midtown is one of the fastest evolving districts in London with a mixture of prestigious businesses such as finance, technology, legal, and media with historical sites, modern restaurants, bars, grand hospitality, as well as green open spaces. The rent starts from £62.50 - £70.00 per sqft (Carter Jonas, ...5 pages/≈1375 words| 3 Sources | APA | Engineering | Research Paper |
- Potential Benefits of Cloning and Genetic EngineeringDescription: Cloning and genetic engineering are are transformative technologies with growing worldwide popularity. The technologies have broad applications across diverse fields, including medicine, agriculture, research, and others. Despite their criticality, a debate has ensued over the past few years concerning...2 pages/≈550 words| 4 Sources | APA | Engineering | Essay |
- Hyperspectral and Multispectral Gas Leak Remote Sensing and MonitoringDescription: Gas leaks in the oil and gas industry are a constant concern due to their potential environmental and ecological effects, huge financial losses, as well as the human safety element associated with such gas leaks (Opeyemi & Olabisi, 2021; Adegboye, Fung, & Karnik, 2019). According to EIA (2021), natural gas...2 pages/≈550 words| 11 Sources | APA | Engineering | Research Proposal |
