Essay Available:
All Pre Written Papers From The Engineering Category
- Identification of System Modelling and Predictive ControlDescription: System modelling is the description of a system using mathematical concepts and terms. Control engineers examine the dynamics of a system and come up with a mathematical description of the dynamics. Modelling industrial processes directs thinking to concept of time delays. System delays can either be a true...6 pages/≈1650 words| 1 Source | Harvard | Engineering | Coursework |
- Evaluating the Design of a Lock in AmplifierDescription: This paper presents the design stages of a lock-in amplifier micro-ohmmeter. Theories, functions of devices and design calculations associated with each design stage is presented. The micro-ohmmeter in this design can be used to measure small resistances, which may include but not limited to the resistance...1 page/≈275 words| 2 Sources | Harvard | Engineering | Coursework |
- Combination Lock Analysis Using VHSIC Hardware Description LanguageDescription: This paper presents the modelling of a “combination lock” state machine that activates an “unlock” output when a certain binary sequence is received. A combinational lock is a lock that is specific only to a set of symbols to dislodge and open. These symbols used to formulate a sequence are typically...12 pages/≈3300 words| 3 Sources | Harvard | Engineering | Coursework |
- How the Consultant Reports Affect the Proposed Development and The Overall Design That We Wi. . .Description: The geotechnical engineer performs a subsurface exploration and engineering analysis and offers recommendations for the foundation and design. The report is mainly focusing on compaction, absorption, drainage, contaminants, and water table....7 pages/≈1925 words| No Sources | Other | Engineering | Essay |
- Fundamental Rules of Ethical Conduct for EngineersDescription: Engineering is vital and grasped profession. As members of this occupation, engineers are awaited to show the highest levels of honesty and integrity. Engineering has a direct and vital effect on the quality of life for all folks. Accordingly, the services offered by engineers needs honesty, impartiality,...6 pages/≈1650 words| 3 Sources | APA | Engineering | Case Study |
- Multi-Family Fire ScenarioDescription: At around 0341 hours on August 14, 2018, the Boise (ID) Fire Department responded to a reported fire incident in a multiple-family dwelling located at the corner of Curtis along Overland Roads. The caller stated, "There were flames everywhere"; before disconnecting, the caller said, "it just blew up."...4 pages/≈1100 words| 3 Sources | APA | Engineering | Coursework |
- ENERGY MODELLING FOR BUILDINGSDescription: Introduction Green buildings have the potential to be one of the most important factors in preserving our increasingly deteriorating climate. There is no simple definition for a green building, but it is simply a framework that magnifies the positives and minimizes the negatives over the building's ent...3 pages/≈825 words| 10 Sources | Harvard | Engineering | Research Paper |
- Formulating Examples of a Literature ReviewDescription: The area of EPC, and especially process mapping, value stream mapping, and process redesign, has continued to receive widespread attention from all sorts of commentators, but most valuably, researchers and scholars. This paper seeks to perform a review of literature that has addressed these EPC issues....3 pages/≈825 words| 4 Sources | MLA | Engineering | Research Paper |
- Report on Building Construction Site Visit in CaliforniaDescription: This report presents the observations made during the construction site visit at California. The observation was made out of specific environmental and health issues surrounding the construction site. The report entailed detail information about the safety of workers and general environmental problems...1 page/≈275 words| No Sources | MLA | Engineering | Essay |
- The Surface Tension of Silica GlassesDescription: We present a new technique for measuring surface voltage and viscosity rapidly and accurately with direct thermal treatment of silica glassed. We demonstrate the applicability of the technique in different glass composition from silica to soft glass fibers, and compare the results with those of techniques....55 pages/≈15125 words| 24 Sources | APA | Engineering | Thesis |
- Pros and Cons of Engineering Projects Being Undertaken by Joint VenturesDescription: Over the years, man has become more developed and sophisticated in his engineering projects. The last century has seen a growing trend in the way human beings undertake engineering activities and projects. Engineers and contractors have become more strategic and are colluding in construction through ...1 page/≈275 words| 2 Sources | APA | Engineering | Essay |
- Performance Rating on Buildings Analysis EssayDescription: The Performance Rating Method is used to determine the amount of Energy that might be consumed in a proposed building upon its completion. However, the modeling is not an actual representation of the energy consumed by the loads in the building after its completion....18 pages/≈4950 words| 3 Sources | APA | Engineering | Essay |
- Analysis of the HVAC Control and Protection Sensors for the Water Cooler Bus Stop StationDescription: The largest land area of Egypt is engulfed by the western desert. Drake, Breeze & Parker, (2013) estimates that approximately 700,000 squad kilometers (two-thirds of the country) of the dry land of Egypt is covered by desert. In some days, the temperatures can rise to 45-degree centigrade....5 pages/≈1375 words| 6 Sources | APA | Engineering | Dissertation |
- The 1954 De Havilland Comet: A Catastrophic Failure of Material ScienceDescription: Material science is an area that has had enormous explorations. It typically involves the scientific study of solid materials and discoveries of new materials to make them useful in our daily interactions. It has been a profitable area to explore. However, there have been shortcomings associated with it. ...2 pages/≈550 words| 2 Sources | APA | Engineering | Essay |
- Solving Mathematical Equations Involving Theory of StructuresDescription: Structural Design-Solution Question1: Moment Distribution Method Distribution factors at A and D are 1 and 0. Stiffness coefficient for columns = EI/2.5 Stiffness coefficient for the beam = EI/8 Joint stiffness B and C = 2EI/5 + EI/8 = 21EI/40 Stiffness factors Joint B BA: (2EI/5)/ (21EI/40) = 0.762...2 pages/≈550 words| No Sources | MLA | Engineering | Coursework |
- Sugar Cane Milling, Components, and QualityDescription: Under the chapter of literature review, it focuses on the studies that related to the project. All the theories, observations, surveys, recitations and understanding of the documentations regarding the project are needed. These are for ensuring the project can be carried out in a better and smoother ...1 page/≈550 words| No Sources | APA | Engineering | Other (Not Listed) |
- Analysis of The Air PollutionDescription: Air pollution remains one of the serious problems the world faces today. Currently, it is a familiar environmental concern that possesses short and long-term effects on human health....7 pages/≈1925 words| 8 Sources | APA | Engineering | Research Paper |
- Anthropometrics- fundamentals of interior designDescription: The key determinants of interior and architectural design include our motion, body dimensions and perception of space. The minimum measures and requirements considered in planning of building layout include an average adult’s dimensions and clearances....2 pages/≈550 words| 3 Sources | MLA | Engineering | Coursework |
- Synthesis of Porous Carbon Nanomaterials Derived From Non-Biodegradable Landfill Waste for Q. . .Description: The declining fossil fuel resources and the anthropogenic destruction of the environment have threatened human beings' future existence on earth. There is a concerted effort worldwide to explore alternative sources of energy that are sustainable and environmentally benign. ...5 pages/≈1375 words| 12 Sources | APA | Engineering | Research Proposal |
- Ultrasensitive 2D silver Nanomaterials for the Detection of Carcinoembryonic Antigen (CEA) C. . .Description: Ultra-sensitive nanosensors are a viable alternative to conventional cancer diagnosis methods such as PCA, ELISA, Nano LC-MS, 2D Page, enzyme immunoassay and western blotting ...2 pages/≈550 words| 7 Sources | APA | Engineering | Research Proposal |
- Astronomy and AstrophysicsDescription: Question #1 Given data Semi major axis of the mars, a=1.5 AU At this point, we can apply Kepler’s Third Law, which states that the ratio of the squares of the orbital period for two planets is equal to the ratio of the cubes of their mean orbit radius T2=a3 Where T is the Time period in Earth Years and...1 page/≈275 words| No Sources | Other | Engineering | Other (Not Listed) |
- Friction AnalysisDescription: This laboratory was intended to study friction and measure its effect on an object's acceleration. For Part I, an optical microscope was used to perform a friction microanalysis. The samples used in the lab were wood and aluminum as the track used in the lab was made from aluminum, and a wooden block was ...4 pages/≈1100 words| 2 Sources | APA | Engineering | Lab Report |
- DecompositionDescription: The symmetry group of a cube is isomorphic to S4 the permutation group on 4 elements. If we number the vertices of the cube from 1 to 4, and where opposite vertices are given the same number, the permutation corresponding to asymmetry can be read out from one of the faces. If we e.g. let the top face be ...2 pages/≈550 words| 2 Sources | APA | Engineering | Math Problem |
- Building Estimates and TenderingDescription: The construction process is composed of different phases. Each part requires a high level of accuracy of execution to ensure safety in costs at the end of the project. It all starts with the decision by the owner of the project. This has to be well analyzed before it can be put into implementation. This is ...7 pages/≈1925 words| 7 Sources | Harvard | Engineering | Case Study |
- Development of Sustainable Integrated Marketing CommunicationsDescription: Renewable energy (RE) has gained significant research attention across the globe due to its ability to reduce environmental damage (Tsai S-B, et al. 2016). However, the complete acceptance of RE with government regulations only are not enough. The willingness by consumers ...103 pages/≈28325 words| 80 Sources | APA | Engineering | Dissertation |
- Civil engineering management Engineering Essay PaperDescription: The steady and rapid development in technological innovations has resulted in several remarkable changes in the world over the past few decades. The developments have had various effects on organizations and institutions in how they carry out their activities...11 pages/≈3025 words| 24 Sources | APA | Engineering | Essay |
- Aerodynamics Engineering Essay Research CourseworkDescription: Commuter airlines today use power-producing aircraft, turboprops, for their shorter routes and thrust-producing aircraft, jets, for their longer routes because of numerous reasons. Thrust is a force which is applied over a distance to do work. For work to be done, energy needs to be transferred....1 page/≈550 words| 2 Sources | MLA | Engineering | Essay |
- Effect of Aluminum Trihydroxide on Thermal Properties Medium Density Fiberboard Description: The thermal properties of medium- density fiberboard (MDF) consists of Kenaf fibre and palm-based pre-polyurethane (Pre-pu) as a green binder. The Kenaf used was in the range of 300 to 500 μm mixed with Aluminium tri hydroxide (ATH) that was varied at 5, 10, and 15 wt% of the total resin mass. ...10 pages/≈2750 words| 15 Sources | Harvard | Engineering | Essay |
- Answer the following questions Engineering Essay PaperDescription: Architects are among the professionals who are incorporated in the construction field. Clients appoint architects to develop a design that meet the requirement that they have specified concerning a structure. Architects can visualize and creatively designing ideas for clients hence...2 pages/≈550 words| 1 Source | MLA | Engineering | Essay |
- Design an air-conditioning system for a luxury car EngineeringDescription: Your company is to design an air-conditioning system for a luxury car, which is to operate in the desert in temperatures of up to 40 °C. The car passenger compartment is approximately 3 m × 3 m × 1.5 m and ten changes per hour of air are required at the desired internal temperature of 20 °C...1 page/≈275 words| No Sources | Other | Engineering | Coursework |
- Workplace Safety from Residual Toxic Gasses Engineering Research PaperDescription: People working in workplaces with toxic substances are at risk of exposure. Gases become toxic when their rates of inhalation exceed the maximum allowable amounts. Companies use occupational exposure standard (OES) and the maximum exposure limit (MEL) to protect...2 pages/≈550 words| 3 Sources | APA | Engineering | Research Paper |
- CASE STUDY Engineering Case Study Research CourseworkDescription: The role of engineers in the design and building of structures cannot be undermined. An engineer is trained to address issues that face human beings. Engineering is concerned with the invention of structures that assist human beings by making life easier. Owing to the importance ...10 pages/≈2750 words| 4 Sources | Harvard | Engineering | Case Study |
- Questions Engineering Lab Report Research CourseworkDescription: Figure () shows current behavior without overcurrent protection while figure (6) show current behavior with over current protections. A comparison of the two graphs shows that with the protection, the fault persists and the current value does not seem to return to its original reference...1 page/≈275 words| 1 Source | MLA | Engineering | Lab Report |
- Assessment 2.1 Tensile Testing Report Engineering Lab ReportDescription: This experiment was conducted so as compare the mechanical properties of aluminum and mild steel. The basics of the operation of a universal testing machine were also learned during this experiment. The Universal Testing Machine can be used to determine the tensile strengths...1 page/≈275 words| 4 Sources | MLA | Engineering | Lab Report |
- Operations and Project Management Interim Report Engineering PaperDescription: This is a consultation report on possibility of executing three operations at the airport. The airport needs to increase and expand its operations in the fourth terminals. The first case scenario Involve designing and development our new airport transport system, which meant to improve...11 pages/≈3025 words| 14 Sources | Harvard | Engineering | Research Paper |
- Affordable Housing. Low cost housing implementation. Engineering EssayDescription: It is a capital-intensive project but the labourers are from the local community in Kibera. It began construction in 2005 and it's still ongoing.Community education and participation was done to convince the locals on the dangers of occupying the railway reserve and relocation strategy....2 pages/≈550 words| 5 Sources | APA | Engineering | Essay |
- FACTORS INFLUENCING HOUSING PRICES IN SAUDI ARABIADescription: Housing is considered as one of the essential requirements of the individual. The accessibility and quality of housing significantly affects individuals' lives. It has direct effect on the socio‐economic improvement of a country....3 pages/≈825 words| 7 Sources | APA | Engineering | Essay |
- Building Information Modelling Management Theory And PracticeDescription: Building information modeling (BIM), can be regarded as a procedure for handling the data formed in the life span of assets CITATION Gel13 \l 1033 (Gelder, Tebbit, Wiggett, & Mordue, 2013). Recently IBM is merging to be among the most hopeful development in engineering, building...3 pages/≈825 words| 15 Sources | APA | Engineering | Coursework |
- How Elements are Arranged in the Periodic Table Engineering EssayDescription: The periodic chart has existed for over a century and contains over one hundred naturally occurring chemical elements. Despite its long existence, some factions are not well informed on how the chemical elements are arranged. This essay aims to fill this information gap and finds that...6 pages/≈1650 words| 6 Sources | MLA | Engineering | Essay |
- Environmental Degradation - Cadillac Desert book analysis EssayDescription: Cadillac Desert is authored by environmentalist Marc Reisner. It spurred a nationwide awareness on its first publication in 1986 about water conservation issues. Ideological dualism is contained in Cadillac Desert’s Book title. The first word illustrates luxury, victory, and boldness....1 page/≈275 words| No Sources | MLA | Engineering | Essay |
- Sustainable Energy Management 2 – EV Engineering Term PaperDescription: According to McDonough and Braungart (2002), life cycle assessment refers to the cradle to grave analysis of the environmental impact emanating from the activities of production, use, and disposal. Analysing major environmental impacts of multiple products enables the determination of the possible...5 pages/≈1375 words| 15 Sources | APA | Engineering | Term Paper |
- Research Methodology Engineering Research ProposalDescription: This section details the methodology applied to the current study. It focuses on the overall research design and process of data collection, as well as the choice methods applied to this process. Considering the nature of the current study/ project, the methodology also features...5 pages/≈1375 words| 2 Sources | Harvard | Engineering | Research Proposal |
- Engineering Thermodynamics Engineering Essay ResearchDescription: A heat engine consists of 3 elements which include a heat source, working object, as well as a heat sink. The whole amount of energy is said to be conserved if the system is isolated. In order to have a flow of heat, temperature difference must be present. Transferring temperature from...2 pages/≈550 words| 1 Source | APA | Engineering | Essay |
- The Forecast Model Of Debris Flows Engineering Thesis WritingDescription: Debris can be defined as mixture of many sediments that are full of water moving down a slope under the pull of gravity and are mainly caused by heavy rainfall or melting of snow especially in the sloppy areas. Debris causes damages and destruction and this has been possible especially in area...50 pages/≈13750 words| 46 Sources | Harvard | Engineering | Thesis |
- Housing In America Engineering Research Paper EssayDescription: The contemporary buildings’ architectural designs in American cities, towns, and suburbs can be attributed to some prominent figures who championed them in the society. America has undergone tremendous changes in many areas, such as industrialization, which later led to urbanization...3 pages/≈825 words| 5 Sources | Harvard | Engineering | Research Paper |
- Carbon and Associated Gases Reduction for Sustainable Environment Description: Emissions carbon and gases associated with are among significant problems that the world faces. Such emissions consume useful produce harmful wastes, with other adverse effects on the environment. ...9 pages/≈2475 words| 29 Sources | Harvard | Engineering | Thesis Proposal |
- Physics and Natural Sciences. Engineering Math ProblemDescription: The particle moves along the positive X-axis, hence its velocity varies as V=αx, where α is a positive constant. Assuming that at the moment t=0 the particle was located at the point x=0, please find:...2 pages/≈550 words| No Sources | Other | Engineering | Math Problem |
- Level of Water in a Dam. Engineering Statistics ProjectDescription: This report presents a model of changing level of water in a dam. Minimum level of water in the dam is taken as h=0 and maximum level is given by hmax. Level of water in the dam is determined by rainfall in the catchment area, evaporation and water uses....2 pages/≈550 words| No Sources | Other | Engineering | Statistics Project |
- Double Wishbone Suspension System Engineering Lab ReportDescription: This report covers the double-wishbone suspension system. Suspension systems are responsible for the connection between wheels and body of the vehicle. Terminologies used in the design of a double-wishbone suspension system, their construction, working, and the advantages and disadvantages...2 pages/≈550 words| 3 Sources | APA | Engineering | Lab Report |
- Forging Process Engineering Lab Report Research PaperDescription: It is the deformation process. In forging the workpiece is compressed between the dies to attain the required shape. The compressing can be achieved either by a sudden impact or gradual pressure. Forging is one of the oldest metalworking processes, which dates bake to 5000 B.C...1 page/≈550 words| 7 Sources | Other | Engineering | Lab Report |
- Advanced Production Management Principle. Key to Implementation of JITDescription: Due to the development in the manufacturing industry an advanced management principle is proposed which is the advanced Toyota production system i.e., TPS also called the advanced TPS. To meet the production requirements, the Japanese production management technology...1 page/≈550 words| 12 Sources | Other | Engineering | Case Study |
- Study the Effect of various Passive Techniques on Heating and Cooling Load of BuildingsDescription: The human comfort level depends upon some suitable environmental conditions i.e. temperature and humidity etc. and air conditioning systems help to maintain these suitable conditions. In this study, suitable building design is presented along with the weather conditions of its surrounding...1 page/≈550 words| 7 Sources | Other | Engineering | Lab Report |
- THE FLOOD. How would you have conducted the job analysis?Description: Should Phil and Linda ignore the old-timers' protests and write up the job descriptions as they see fit? Why? Why not? How would you go about resolving the differences?...3 pages/≈825 words| 3 Sources | APA | Engineering | Essay |
- Report Analysis on Behavior of Specific Materials. EngineeringDescription: This report gives an illustration of how raw materials of these products are modified to exhibit certain behavior so as to endure resistance in specific conditions of the environments they are exposed to or used....1 page/≈550 words| 9 Sources | APA | Engineering | Research Paper |
- Building Measurement. Engineering Coursework AssignmentDescription: Building measurement and quantity estimation is an important component of what architects do. Often, measurement as an aspect of an architect’s work is seeks to support other activities and services....9 pages/≈2475 words| 8 Sources | APA | Engineering | Coursework |
- Personal Strategy for Project Engineer in Oman. Engineering EssayDescription: To be a good project engineer, effective leadership skills are indispensable. Project management entails managing both resources and people. I need to perfect my leadership skills to understand strategies of managing teams through setting a mission and vision of the projects. ...2 pages/≈550 words| No Sources | Harvard | Engineering | Essay |
- Using the vibration signal from the tap test for the quality control of the 3D printed polym. . .Description: Additive manufacturing technological innovation is one of the best and current creation procedures at present. This technological innovation, concocted during the 1980s, has gone global lately. Any part or thing can be delivered adequately by methods for the 3D printers...1 page/≈275 words| 14 Sources | Chicago | Engineering | Research Paper |
- Chemoselective partial reduction of amides in the presence of esters to form aldehydes by us. . .Description: Chemoselective Partial partial Rreduction of Aamides in the presence of esters to form Aaldehydes over Esters withby using a new Ccopper Ddiisobutyl-t-butoxyaluminum Hhydride (CDBBA) reagent....1 page/≈550 words| 24 Sources | APA | Engineering | Research Paper |
- Preparation and characterization of SiO2-coated submicron-sized face-centered tetragonal L10. . .Description: Through the morphology morphological observation and observation and XRD analysis of the particles, confirmed that the fabrication of the L10 Fe-Pt/SiO2-core/shell particles were fabricated with submicron-sized cores, less smaller than the critical size for a single domain. were confirmed. ...1 page/≈550 words| 8 Sources | APA | Engineering | Research Paper |
- Carbon capture, storage and utilization in oil refineriesDescription: In India, the carbon emissions in 2018 were 123 Mt CO2, which increased to 132 Mt CO2 in 2019. The total amount of emissions resulting from oil and gas operations is presently 5200 million tonnes (Mt) (CO2-eq), accounting for 15% of the total energy sector's carbon emissions....1 page/≈275 words| 22 Sources | APA | Engineering | Article |
- Ethics and Ethical Behavior as it Relates to AEC Engineering PaperDescription: Designing and building professionals are often required to uphold excellent morals and ethical behaviors. As such, the contractors, project managers, architects, and engineers have significant professional conscience rights. Ethical conduct is highly correlated with legal conduct although...5 pages/≈1375 words| 3 Sources | APA | Engineering | Term Paper |
- RESEARCH PAPER ABOUT DIGITAL MEDIA ARCHTECTURE. EngineeringDescription: There is a very interesting relationship between digital media and architectural space. Digital media impacts and influences architectural space in away that is unique. Use of light in media facades greatly intrudes into the private space of people. ...5 pages/≈1375 words| 4 Sources | MLA | Engineering | Essay |
- Reading Smoke and Company Operations. Engineering CourseworkDescription: The ability to read smoke is gaining headway in contemporary society, a topic that has assisted firefighters in predicting the various fire behaviors within a structure. ...4 pages/≈1100 words| 4 Sources | APA | Engineering | Coursework |
- Application of building information modelling. Engineering EssayDescription: At its essence, BIM is a collaboration tool used in building projects in generating and sharing information. BIM tools are closely associated with 3D building modeling software that allows all parties involved with the project to virtualize what the finished project will look like...1 page/≈550 words| 2 Sources | MLA | Engineering | Essay |
- Civil Construction Engineering Article Research PaperDescription: First, I would like thank God for giving me the resources and strength for the research work I have done. This is purely my work I gathered from various journals and books I came across that purely dealt with the research topic I was given, which is FABRICATION AND ASSEMBLY...12 pages/≈3300 words| 16 Sources | Harvard | Engineering | Article |
- Civil Engineering Engineering Multiple Choice QuestionsDescription: For the construction of the footbridge, the most appropriate structural form is the trussed structural steel. The reasons behind the selection of a truss bridge are with respect to the load in which the bridge will be exposed to. Often, the weight of a human being is not so much that it will impose...9 pages/≈2475 words| 7 Sources | APA | Engineering | Multiple Choice Questions |
- Architecture Engineering Research Paper CourseworkDescription: The concept of an alternative subway system was first introduced in the early 1900s by Francis Smith. The concept merged with the plans of constructing a third-rail subway system connecting counties within the state. In 1946, Bay Area business leaders raised concerns to the authorities on the challenges...1 page/≈275 words| 3 Sources | APA | Engineering | Other (Not Listed) |
- Manufacturing and Material selection Engineering EssayDescription: Errors are a common aspect of measuring instruments. These errors either relates to the instrument variation or at times they occur as a result of human failure to correctly configure the setup or take measurements. These sources can be categorized into three major groups,...2 pages/≈550 words| 4 Sources | APA | Engineering | Essay |
- Architecture work Engineering Term Paper Research EssayDescription: Some of the most used techniques in this stage include the Ansoff’s Growth Vector Matrix, PEST Analysis, Porter’s Five Competitive Forces, and SWOT Analysis. These techniques are used to determine the progressive or the adaptability of the plan in an organization....10 pages/≈2750 words| No Sources | APA | Engineering | Term Paper |
- TRANSIENT RESPONSE OF A MOTOR. Engineering Lab ReportDescription: According to Say and Taylor, an electric motor serves as an electro-mechanical device that converts the input (electrical energy) to produce an output (rotational/mechanical energy). ...3 pages/≈825 words| 2 Sources | MLA | Engineering | Lab Report |
- CV for Senior Engineering Manager Engineering Resume WritingDescription: Accomplished and resourceful professional with comprehensive experience credited in research and development, strategy development, and engineering management. Possess in-depth knowledge and understanding of naval architecture, planning and prioritising engineering activities,...2 pages/≈550 words| No Sources | Other | Engineering | Resume Writing |
- Organizational Structure Of Human Resource Of A CompanyDescription: Construction firms are built around project management goals. To this end, the organizational structure of a construction firm often branches off into several departments, each responsible for a different task of the business, from satisfying contractual obligations to drumming up new business....2 pages/≈550 words| No Sources | Other | Engineering | Term Paper |
- Telecommunication Engineering Research Paper EssayDescription: In future officers will definitely look different significantly (Stein, Newell, Wagner, Mari-Klara, & Galliers, 2015). Today's question objective is to have a visionary practice. The first vision to have is that office in the future might not exist and people will be working from wherever they are...1 page/≈550 words| 1 Source | APA | Engineering | Research Paper |
- Mental Images Of A City Engineering Essay ResearchDescription: A city is considered one of the dramatic events in the environment, and humanity turns their faculty of sight since apprehension of the environment is achieved through vision. Such visions are important in not only evoking memories but also useful in eliciting responsive emotions...6 pages/≈1650 words| 10 Sources | Harvard | Engineering | Essay |
- Introduction to Systems Engineering Engineering EssayDescription: NASA has recorded millions of technology spin-off in various sectors including in the health sector. Some of the notable spinoffs from the shuttle in the medical sector include the implantable heart resynchronization device. The implantable heart resynchronization device was partially developed...1 page/≈275 words| 3 Sources | MLA | Engineering | Essay |
- Introduction to Systems Engineering by NASADescription: NASA has recorded millions of technology spin-off in various sectors including in the health sector. Some of the notable spinoffs from the shuttle in the medical sector include the implantable heart resynchronization device. The implantable heart resynchronization device was partially developed from the on ...1 page/≈275 words| 3 Sources | MLA | Engineering | Essay |
- Family Globalization Analysis Engineering Essay PaperDescription: International migration is believed to have accelerated over the past fifty years whereby migrants travel abroad to specific destinations due to various pull and push factors. As a result of the diversity in terms of destination and origin of the migrants, complex global migration patterns have emerged...3 pages/≈825 words| 2 Sources | APA | Engineering | Essay |
- SPH4U- UNIT 2 TEST AND UNIT 3 TEST Engineering MCQDescription: SPH4U- UNIT 2 TEST AND UNIT 3 TEST Engineering MCQ To achieve constant velocity of an object, the Newton’s second law says that applying force on an object, it will have an acceleration (F=ma). Hence an object, moving at constant velocity, must have a net force acting on it (Answer is a)...7 pages/≈1925 words| No Sources | APA | Engineering | Multiple Choice Questions |
- Digital Communication Assignment Engineering EssayDescription: The real human life is full of communication. Communication made is comprised of the signals. The signals are in the form of sound, which is naturally analog. It is to be established over a wide area that an analog signal is transmitted through wires. The sending process takes places...6 pages/≈1650 words| No Sources | MLA | Engineering | Other (Not Listed) |
- Wooden Table Design Engineering Research Paper EssayDescription: Flat/countersunk screws will be used. Countersunk screws are easy to conceal in the wood and offer a good finished surface (Hiebert et al. 12). The screws to be used should have a nominal diameter #10 (a basic major diameter of 0.19”), and a length of 2.5”. The table below provides a schedule of screws...1 page/≈275 words| 1 Source | MLA | Engineering | Other (Not Listed) |
- Beam Design. Beam Design to Eurocode 2. Engineering Math ProblemDescription: Beam is a structural component that carries laterally applied loads. It primarily deflects through bending. When loads are applied on a beam, reactions forces are produced at its supports (Wight & MacGregor, 2005)....6 pages/≈1650 words| 5 Sources | APA | Engineering | Math Problem |
- “Long” Carbon Fibers for Blast Resistant Concrete Engineering PaperDescription: Concrete is the most widely used material in construction. The application of conventional concrete is however limited in areas that involve blasting. The fragmentation of normal concrete can pose a danger to workers and reduce the ability of concrete to bear loads. Gliha conducted a research...3 pages/≈825 words| 1 Source | MLA | Engineering | Research Paper |
- Nanotechnology in desalination Engineering Research PaperDescription: Water is a paramount commodity for human survival. For centuries, it has proven to be an essential ingredient for sustainable development and healthy ecosystems. It is significant for ameliorating the global burden of disease and fostering the productivity and prosperity of the planet....1 page/≈275 words| 40 Sources | APA | Engineering | Research Paper |
- Engineering and Construction Questions. Engineering CourseworkDescription: Research the 2005 fire at the Patrick Air Force Base Officers’ Club. Write a short description of the incident to include the cause of the fire, the amount of damage, and measures that could have been used to prevent the fire....2 pages/≈550 words| 3 Sources | APA | Engineering | Coursework |
- PhD in Control Systems. Engineering Admission ServicesDescription: Compared to parallel STEM (Science, Engineering, Technology and Math) disciplines, electrical engineering – and, for that matter, Technology – has long been established as a critical conceptual and applied discipline for growth within and across different business and social endeavors and activities....8 pages/≈2200 words| 12 Sources | Harvard | Engineering | Admission Essay |
- Question: How does personality affect relationship success - The research area you will be u. . .Description: Individuals are surrounded by others in their entire life. This proximity, whether geographical or otherwise, develop interactions that result in highly dynamic and complex network of relationships (Bono & Purvanova, 2016, 1)....5 pages/≈1375 words| 8 Sources | Harvard | Engineering | Research Paper |
- Land and Property Management: Burji Khalifa Engineering Term PaperDescription: Formerly known as Burji Dubai, Burji Khalifa is today the world’s tallest structure and building after succeeding Taipei 101 of Shanghai in 2010. It was designed to be of large scale mixed-use. The decision to build the Dubai tower was to help diversify the country’s petrol-based economy into other...1 page/≈275 words| 7 Sources | APA | Engineering | Term Paper |
- Effectiveness of Thermal Protection System in Design of Engineering Reentry Vehicles for Spa. . .Description: The beginning of 21st century has seen an increment in the number of scientists who travel to space for exploration and scientific research. There exist a massive difference between the planet earth and the space in terms of ability to support life. As such, in planning for a trip to space,...31 pages/≈8525 words| 6 Sources | APA | Engineering | Research Paper |
- Efficiency of a Solar Cell by Addition of Layers of Copper SulfateDescription: This research aims at improving the efficiency of a solar cell by first determining its performance capacity without any alteration and making a comparison of its improvement through the addition of layers of copper sulfate. Copper sulfate is known to absorb heat from the sun and allow solar energy...1 page/≈275 words| No Sources | MLA | Engineering | Coursework |
- Architectural engineering welcome flyer Engineering EssayDescription: The overall commitment of the university is ensuring detailed learning quality for the students while upholding the highest integrity of every academic program. Architectural engineering is inclusive of this commitment. According to Kim, architectural engineers are entrusted...2 pages/≈550 words| 3 Sources | MLA | Engineering | Essay |
- Aviation Security Engineering Essay Research PaperDescription: Since September 11, 2001, there has been a raft of changes on aviation security and airport operations. Some of the reactive changes have led to huge increases in costs while others have even inconvenienced travellers in a number of ways (IATA, 2018). As a result, there have been calls...12 pages/≈3300 words| 12 Sources | Harvard | Engineering | Essay |
- Ontario Electric Power Generation Engineering Research PaperDescription: The history of electric power generation is extensive. After Michael Faraday discovered ways of generating electricity, people started generating electricity for commercial purposes in 1870. It was during the same year that the mechanical production of electricity initiated the second industrial revolution...7 pages/≈1925 words| 5 Sources | Other | Engineering | Research Paper |
- Materials and Manufacturing Engineering. Term PaperDescription: In the entire production of a product, the manufacturing process is the most important part of it since this is where the change of form of a material and measurements like volume and other measurements takes place. ...4 pages/≈1100 words| 19 Sources | APA | Engineering | Term Paper |
- Monte Carlo Technique. Engineering Statistics Project.Description: This was an interesting technique called monte Carlo technique, which I did on Matlab. it can be applied in statistics, where it isolates all the possibilities, especially in games....9 pages/≈2475 words| No Sources | Other | Engineering | Statistics Project |
- Power Systems Analysis and Simulation. Engineering Lab ReportDescription: In most countries, electrical is delivered to every person following a particular channel or a system. Electric grid is what does the trick, it transmits the generated electricity and distribute it to the consumers CITATION Den13 \l 1033 [1]....9 pages/≈2475 words| 4 Sources | Other | Engineering | Lab Report |
- Standalone hybrid energy system. Engineering Case StudyDescription: Hybrid energy system is where there’s a combination of two or more methods of generation of energy, this includes even the storage and the technologies of end use....11 pages/≈3025 words| 29 Sources | APA | Engineering | Case Study |
- Infrastructure Design of Kingsbury drive. Engineering Term PaperDescription: With the economic advancements, many people continue to own private cars, this has been the cause for traffic congestion in many towns, cities and urban centres....7 pages/≈1925 words| 3 Sources | APA | Engineering | Term Paper |
- Electronics (Simulation questions). Engineering Lab ReportDescription: Complementary Metal Oxide Semiconductor (CMOS), Transistor-Transistor Logic (TTL) and N-type metal-oxide-semiconductors (NMOS), are logic gates that are not only classified by their logical functions, but their families. ...2 pages/≈550 words| 3 Sources | Other | Engineering | Lab Report |
- Urban Forest Planting Proposal Engineering Research ProposalDescription: Since the City of Hong Kong is mainly comprised of buildings and artificial surfaces with limited tree cover, shade does not come naturally to several parts of the City CITATION Zha13 \l 1033 (Zhang & Jim, 2013). These high-density developments have led to poor-quality ...10 pages/≈2750 words| 12 Sources | APA | Engineering | Research Proposal |
- Preventive Maintenance Report on Birabahn structure Engineering PaperDescription: Preventive support incorporates all the administration and consideration given to a benefit so as to keep up the advantage in great working and sufficient condition all through its operational lifecycle. The procedure can be brought out through arranged assessment of the benefit could be a plant...10 pages/≈2750 words| 10 Sources | APA | Engineering | Research Paper |
